Atlas Scientific
Surveyor™ Analog Isolator
Surveyor™ Analog Isolator
19 in stock
Description
The Gravity™ Analog Isolator is designed to work exclusively with our Gravity line of low-cost embedded meters. These isolators remove all electrical interference coming from other probes or pumps in the same water you are testing.
It converts the analog output from a Gravity pH, Gravity ORP, or Gravity D.O. meter to both, a PWM and a voltage signal.
The PWM signal can then be easily converted back to a noise-free reading. Because this isolator uses PWM, it can be connected to a microcontroller that does not have an ADC, such as a Raspberry Pi.
The voltage signal converts the sensor value into 0 – 3 Volts, good for a micro-controller that does have an ADC.
*A Raspberry Pi cannot accurately read PWM or analog voltage without a 3rd party hat.
Specifications
Data output | 10.6 KHz PWM |
0-3 Volts | |
Voltage input | 3.0V − 5.0V |
Connector | Header pins |
Current consumption | 5V – 23 mA 3.3V – 15.7 mA |
Carrier Board dimensions | 42mm x 32mm (2.2″ x 1.2″) |
Weight | 13 grams |
Shipping & Returns
It may happen that you want to return an order. Because the product does not suit you, maybe there is another reason why you would not want the order. Whatever the reason, you have the right to cancel your order up to 14 days after receipt without giving a reason.
After cancellation you have 14 days to return your product. You will then be credited 85% order amount excluding shipping. For more information click the following link: /pages/shipping-and-returns
What's Included?
The Gravity™ Analog Isolator comes with:
• 1x Gravity™ Analog Isolator
• 4x standoffs and screws