Atlas Scientific
EZO-PMP™ Basic Kit
EZO-PMP™ Basic Kit
3 in stock
No se pudo cargar la disponibilidad de retiro
Description
The EZO-PMP™ Kit comes with:
Peristaltic pump with controller, 2 x 30.48 cm long pump tubes, 2 inline tubing connectors, 12 volt power supply, power supply connector, data cable with 5 pin male header, and a 10ml graduated cylinder (for calibration).
The replacement cassettes can be autoclave sterilized.
| Flow rate | 0.5ml to 105ml/mins |
| Accuracy | +/- 1% |
| Viscosity | 0.1 – 2,000 cP |
| Modes of operation | Continuous dispensing |
| Volume dispensing | |
| Dose over time mode | |
| Constant flow rate | |
| Dispense at startup | |
| Connector | 5 lead data cable |
| Calibration | Single point |
| Supplied tubing | 2 x 30.48 cm |
| Tubing size | Any 5mm O.D. tubing |
| Data protocol | UART & I2C |
| Default I2C address | 103 (0x67) |
| Operating voltage | 3.3V – 5V (logic) |
| 12V – 24V (motor) | |
| Pump head | 8.1 meters (26.5’) |
| Data format | ASCII |
| Food safe | Yes |
Specifications
Shipping & Returns
It may happen that you want to return an order. Because the product does not suit you, maybe there is another reason why you would not want the order. Whatever the reason, you have the right to cancel your order up to 14 days after receipt without giving a reason.
After cancellation you have 14 days to return your product. You will then be credited 85% order amount excluding shipping. For more information click the following link: /pages/shipping-and-returns
What's Included?
The EZO-PMP™ Kit comes with:
- 1x peristaltic pump with controller,
- 2x 30. cm long pump tubes
- 2x inline tubing connectors,
- 1x 12 volt power supply,
- 1x power supply connector,
- 1x data cable with 5 pin male header
- 1x 10ml graduated cylinder (for calibration).
Documentation
Documents
Downloads
Basic Sample Code
- Arduino Uno Sample Code
- Arduino Mega / Giga Sample Code
- Arduino I2C Sample Code
- Raspberry Pi Sample Code (I2C)
3D file
Library
Instructable
