The Atlas Scientific Sensor Bridge allows you to connect 4 more sensors or pumps to your system. Wire your power, ground, and I2C directly into the screw terminals, and your sensors into the header pins. This board includes pull-up resistors, which are for proper I2C transmission. If you are using more than 1 of the same sensor/pump, be sure to change its I2C address.

The Sensor Bridge was designed to work with the following products:

EZO-Co2
EZO-O2
EZO-HUM
EZO-PRS
EZO-RGB
EZO-PMP
EZO-PMP-L

It may happen that you want to return an order. Because the product does not suit you, maybe there is another reason why you would not want the order. Whatever the reason, you have the right to cancel your order up to 14 days after receipt without giving a reason.

After cancellation you have 14 days to return your product. You will then be credited 85% order amount excluding shipping. For more information click the following link: /pages/shipping-and-returns

The Sensor Bridge comes with:

• 1x Sensor Bridge

Documents

• CE Certificate
• CSA Certificate
• RoHS Certificate