This pre-filter is intended to be used alongside the Atlas Scientific 1/4” flow meter.

If water with particulate matter will be passing through the flow meter, a pre-filter of at least 80 microns must be used. The blades of the paddle wheel can become jammed by debris if you are not using a pre-filter. Jammed paddle wheel blades will not damage the flow meter; however, it will not be possible to get accurate flow readings until the blockage has been removed.

• 80 Mesh stainless steel pre-filter (178 microns)

• 1/4” Female NPT Input/Output

• Max pressure of 861 kPa (120 PSI)

• Max temp 100°C (212°F)

It may happen that you want to return an order. Because the product does not suit you, maybe there is another reason why you would not want the order. Whatever the reason, you have the right to cancel your order up to 14 days after receipt without giving a reason.

After cancellation you have 14 days to return your product. You will then be credited 85% order amount excluding shipping. For more information click the following link: /pages/shipping-and-returns

The 1/4" Pre-Filter comes with: